Narrow Transport Central Commodity System PlanterUnfold the 1770NT CCS from its 12-foot transport width and see how much we''ve packed into one narrow-transport planter.We added the Central Commodity System to our 1770NT Planter for up to 100 bushels of seed-carrying capacity. The new Pro-Series row-units plant corn, soybeans, cotton and milo with exceptional accuracy. If you plant edible beans or other specialty crops, order your 1770NT CCS with our MaxEmerge Plus row-units. And when it''s time to move on, you''ll get over tight bridges and narrow roads with ease.

The panel also recommended the farm ministry open the gates after taking measures to ensure that seawater flowing back into the dike does not cause damage to local residents living near the tideland.Agriculture, Forestry and Fisheries Ministry officials said they will have to carefully weigh the timing of the gate opening since the panel recommended that measures be taken to prevent the inflow of seawater from stirring sludge accumulated at the bottom of the reservoir and thus inflicting damage to the entire sea.The Nagasaki prefectural government and assembly remain opposed to opening the gates. The 237 billion yen spent on reclamation work has brought lucrative economic benefits to the local economy.

HULL: 157'' x 132'' x 18''.VARIABLE LOAD: 3,762 kips.HELIPORT: 60'' x 60''.STORAGE: Mud & Cmt Bulk--6,000 cf +3,000sks; Liquid Mud--1,691 bbl; Fuel--2,100 bbl;Water for Drilling--5,900 bbl; Potable Water--1,000 bbl.DRILLING EQUIPMENT: Drawworks-Nat''l 1320UE; Pumps--two Nat''l 12-P-160; Primemovers--three EMD 16-645; Rotary Table--Nat''l 37 1/2"; TopDrive--Varco TDS-3.BOP SYSTEM: Hydril diverter, Shaffer annular,CIW rams, 10,000 psi.CRANES: Nat''l. OS 105 w/100'' boom, one UnitMariner 500-SD w/100'' boom.REMARKS: Formerly Mr. Sage and Ocean Sentry.

Though light in weight, Airbor magnetic drill has a powerful 1.6-hp air motor and 1,600-lb magnetic holding strength. With its extra rack, stroke length is extended to 10 1/4 in. Annular cutter capacity is up to 2 1/16 in. diam. Geared chuck adapter converts the unit to a standard drill press. The Slugger Air Force pneumatic drill, at 24 lbs, 6 1/4" high, is useful for confined area drilling. The drill''s features include a permanent magnet that turns on or off by air power, a cutter capacity of up to 1 1/16" diameter x 3/4" depth and the ability to use ShortSlugger cutters and frame cutters. These cutters'' geometry allows the operator to drill multi-layered truck frames in a single pass.

©2003 www.circular-saws.net All rights reserved.