Pneumatic ratchets, grinders, cut-off tools, drills, shears, riveters, buffers, sanders, spray guns, reciprocating saws, punch flange tools, chisels, and sandblasters all have their place in the farm shop.And if you''ve used a manual grease or caulking gun for any length of time, you will appreciate the ease of operation, not to mention the even application achieved when the gun is powered by air.If you don''t routinely use air tools, give them a try. Your muscles will thank you. Cut costs and Curtail accidents with balanced brakesFor truck fleets pulling semi-trailers or hauling doubles and triples combinations, the secrets for reducing accidents, achieving better tire mileage, reducing fuel costs, and lowering maintenance costs are to properly specify and maintain a balanced air brake system.

Saw Uses CV or CC Power Supplies,... 200 to 1,500 A, 28 to 44 V, at 60- to 100-percent-duty cycle. Automatic units commonly use up to 1,500 A on one wire. Cv welding machines that offer variable-slope control give the welder extra adjustability, and can extend the usefulness of the machine to weld a range of material thicknesses and types.Selection of Power SourcesWhen choosing a power source, start by checking NEMA specs. NEMA Class I arc-welding power sources deliver rated output at 60-, 80-, or 100-percent-duty cycle: Class II units, 30-, 40-, or 50-percent; and Class III, 20 percent. First consider capacity and kind of current needed for the job. Rely on the manufacturer''s rating as being conservative: don''t buy more capacity than needed. Choose low--duty-cycle machines only for maintenance or for intermittent welding. If portability is important, consider inverter units.

"We are introducing a new vegetable planter exclusively for the North American market," said Abate. "It will have a heavier frame than what we sell in Europe." The frame will be made by an outside supplier in Illinois, and Gaspardo planter units will be shipped to Rock Island for assembly on the heavier frames. It will not be marketed through one of Gaspardo''s seven distributors.Direct marketing"We will market the planter directly to growers," said Abate. "The U.S. represents a huge market for us."Maschio/Gaspardo is one of many Italian manufactures which supply proprietary merchandise to U.S. manufacturers and suppliers. Companies like Polmac in Mirandola, Italy which makes spray nozzles and values for many companies in the U.S. Bondioli and Pavesi of Suzaara, Italy supplies power take off shafts for several U.S. equipment manufacturers.

©2003 www.circular-saws.net All rights reserved.