While the analyst views the moves positively, he says "much bolder moves are necessary" to bring return on assets up. The C316 series cold saws have a vertical column construction that is said to provide stable saw frame guidance, resulting in vibration-free sawing. The saws can operate in a conventional 90 degree cutoff mode, or with the turn of the locking lever, the saw frame can be swiveled to any angle up to 45 degrees left or 60 degrees right for miter sawing. The mitering device has a visible vernier scale and a preset zero return stop. The saws are available in a completely manual model, or a manual model with a quick-clamping air vise.According to the company, all saws feature a precision-ground saw bed, heavy-duty drive and TEFC motors, enclosed transmission, full coolant system, removable full blade guarding and a powered rotary brush cleaner to eliminate plugging and loading that can cause premature blade failure. The beauty of snoring is that the perpetrator can plead temporary amnesia and get away with it. After all, you can saw wood for hours without disturbing yourself. To your other half, however, it''s like sleeping next to a landing strip. And that, unless you''re strictly into one-night stands, is the reason why many guys finally do something about it.

The trowel method is a hand-applied application generally used for thin lining (i.e. ladle tops at the pour areas). The amount of water will vary with the type of refractory and must be just enough for the material to be sticky and stay in place. An important thing to pay attention to when troweling is to avoid over troweling the finished surface. This will bring cement to the surface and have the effect of sealing the refractory, thus restricting the escape of water vapor, which occurs during dry out. Sealed-in moisture can turn to steam during dry out and explode the lining.

Most pressure washers that you''ll find for rent or sale are gas-powered. This type can deliver higher water pressure than the electric kind, some more than 3,000 psi. But gas-powered washers also require more water: 2 to 3 gpm. These washers are the best choice for bigger jobs like preparing siding for painting (Photo 2), removing "aging" stains from wood decks (Photo 5) and deep-cleaning concrete. You can rent one for about $60 a day, plus the cost of accessories like chemical injectors (Photo 1) or longer spray wands for reaching high places. Gas-powered washers (non-commercial units) cost $300 to $800 depending on the pressure they deliver, their features and the engine and pump quality.

©2003 www.circular-saws.net All rights reserved.