Machine runs on 33.3-hp., liquid-cooled Isuzu 3LDI engine. A 65-hp. rated hydrostatic transmission is equipped with servo control to reduce pedal effort in forward and reverse travel modes. Loader boasts 3,400-lb. breakout force and 2,100-lb. lift capacity. Maximum loading height is 90 ins. Bucket holds 1/2 cu. yd. Ideal for construction, utility, landscaping, and other small or medium earthmoving applications. Ingersoll introduced its 7000 Series Loader/Backhoe at EXPO 2001. The 7020LBH is a compact 4-wheel-drive tractor designed and built from the ground up as a dedicated loader backhoe. Engineered as an integral part of the tractor and frame, the loader has heavy-duty lift arms with a reinforced bucket for maximum strength and single-lever control operation. The loader bucket''s lift capacity is 750 pounds at full height. The backhoe is coupled to the tractor via mounting arms that are connected to a counter weight for optimum performance. It offers a 92-inch digging depth with joystick controls and a selection of buckets from 8 to 24 inches. The tractor is powered by a 20-hp. Kohler engine. It has a hydraulic drive through a 2-speed transaxle controlled by a foot pedal.

Required dutyThe first light towers built were installed on rescue trucks and have evolved into being used on pumper and aerial trucks. Light towers are available from 3kw to 9kw using halogen or metal halide lights. Proper lighting is essential for emergency scene safety, where being seen is just as critical as being able to see. Lighting often is taken for granted because most training is done during daytime hours. Lighting should be put in to service automatically.

Though light in weight, Airbor magnetic drill has a powerful 1.6-hp air motor and 1,600-lb magnetic holding strength. With its extra rack, stroke length is extended to 10 1/4 in. Annular cutter capacity is up to 2 1/16 in. diam. Geared chuck adapter converts the unit to a standard drill press. The Slugger Air Force pneumatic drill, at 24 lbs, 6 1/4" high, is useful for confined area drilling. The drill''s features include a permanent magnet that turns on or off by air power, a cutter capacity of up to 1 1/16" diameter x 3/4" depth and the ability to use ShortSlugger cutters and frame cutters. These cutters'' geometry allows the operator to drill multi-layered truck frames in a single pass.

©2003 www.circular-saws.net All rights reserved.