Other standard features of the water trailers include a 20 ft. rigid suction hose with hydrant adapter and strainer, 25 ft. of a 2 in. spray hose with nozzle, 50 ft. of a 3/4 in. garden hose with spray nozzle, Navy brass spray heads on the rear of the trailer, a 2 in. ball or 3 in. ring hitch with adjustable tongue heights, hydraulic surge or electric brakes and tandem 3500 lb. axles on the MWT500 and 6000 lb. axles on the MWT1000. All hoses are stowed in a reversible fender-mounted rack.Unlike other manufacturers in today''s just-in-time environment, Magnum keeps a quantity of finished inventory on hand "so we can have timely right-on delivery," Roberts said. "We try to keep everything on hand so that we can react when our customers call."

WORK AREA: India.Catleia Oil Co.(Petrobras subsidiary)PETROBRAS VIRIG DESIGN: RG LeTourneau, Inc.CONSTRUCTION: Davie Shipbuilding Ltd., Canada, 1982.PERFORMANCE: Water Depth--230''; Drilling Depth--23,000''.QUARTERS: 84 persons.HULL: 243'' x 200'' x 26''.VARIABLE LOAD: 1,997 t.HELIPORT: 70'' dia.STORAGE: Mud & Cmt Bulk--7,200; LiquidMud--1,416 bbl; Fuel--2,970 bbl; Water forDrilling--6,657 bbl; Potable Water--2,760 bbl.DRILLING EQUIPMENT: Drawworks--Oilwell E-3000;Pumps--Two Oilwell A-1700-PT, triplex;

The consumer versions of the Griphoists are the Pull All, which is rated to move 700 lbs. and the Super Pull All, rated at 1500 lbs. Of course you can get heavy-duty versions that move up to eight tons. The Pull Ails can handle pulling out stumps, hoisting car engines, and other homestead chores.--KKThe principle may be described as `hand-to-hand'' like a man pulling a rope. While one hand pulls, the other changes position to pull in turn.The two hands represent the two jaws of the TIRFOR. They grip the wire rope without damaging it. They pull it during forward operation and restrain it during reverse operation.

Though light in weight, Airbor magnetic drill has a powerful 1.6-hp air motor and 1,600-lb magnetic holding strength. With its extra rack, stroke length is extended to 10 1/4 in. Annular cutter capacity is up to 2 1/16 in. diam. Geared chuck adapter converts the unit to a standard drill press. The Slugger Air Force pneumatic drill, at 24 lbs, 6 1/4" high, is useful for confined area drilling. The drill''s features include a permanent magnet that turns on or off by air power, a cutter capacity of up to 1 1/16" diameter x 3/4" depth and the ability to use ShortSlugger cutters and frame cutters. These cutters'' geometry allows the operator to drill multi-layered truck frames in a single pass.

©2003 www.circular-saws.net All rights reserved.